Product Introduction
HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is a kind of silicon-ether type polymer. It is milk white to light yellow liquid, with favorable oil antifoaming, oil solubility and stability. It can not only overcome the disadvantage of bad stability and little solubility of silicon-oil antifoam agent (T901), but also relieve the problem of possibly lose of antifoam property due to overhigh air-release-value of non-silicon oil antifoam agent when there exists some additives, and prolong the service life of lubricating oils.
APPLICATIONS
HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is used primarily for various lubricant oils.
Reference dosage
The dosage is from 5.0mg/kg to 30 mg/kg.
Technical Data Sheet
1. Introduction
HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is a high reactive type antifoam additive for lubricant formulations. It is designed to reduce foam formation and control air entrainment in lubricant systems.
2. Features and Benefits
– Excellent foam control: HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT effectively reduces foam formation and prevents foam collapse, ensuring smooth lubricant operation.
– High reactivity: HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT reacts quickly with foam-generating substances, providing immediate foam control.
– Compatibility: HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is compatible with a wide range of lubricant formulations, including mineral oil-based, synthetic, and vegetable oil-based lubricants.
– Easy to use: HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is a liquid additive that can be easily incorporated into lubricant formulations without additional processing steps.
– Stable performance: HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT maintains its foam control properties over a wide range of temperatures and operating conditions.
3. Typical Properties
Appearance: Clear, colorless liquid
Density at 20°C: 0.88 g/cm3
Viscosity at 40°C: 10 cSt
Flash Point (COC): >150°C
pH: 7-9
4. Recommended Dosage
The recommended dosage of HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is typically between 0.01% and 0.2% by weight of the lubricant formulation. However, the optimal dosage may vary depending on the specific requirements of the lubricant system.
5. Application
HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is suitable for use in a wide range of lubricant applications, including automotive, industrial, and marine lubricants. It can be incorporated into lubricant formulations during the blending process.
6. Handling and Storage
HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT should be stored in a cool, dry place away from direct sunlight and heat sources. Avoid contact with strong oxidizing agents. Please refer to the Material Safety Data Sheet (MSDS) for detailed handling and storage instructions.
7. Health and Safety
HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is not expected to be harmful when used as directed. However, it is recommended to follow standard safety precautions when handling and using this product. Please refer to the MSDS for detailed health and safety information.
8. Packaging
HIGH REACTIVE TYPE ANTIFOAM ADDITIVE FOR LUBRICANT is available in 200 kg drums or 1000 kg IBC containers.
Note: The information presented herein is based on technical data and test results obtained by Shanghai Minglan Chemical Co., Ltd. It is intended to be used as a guide for the use of the product. However, Shanghai Minglan Chemical Co., Ltd. makes no warranties, express or implied, as to the accuracy or completeness of the information contained herein. Users should conduct their own tests to determine the suitability of the product for their intended applications.
